English
BACK TO LOSS PREVENTION
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
LATEST AMENDMENT TO MARPOL ANNEX VI, APPENDIX V 2024 | INFORMATION TO BE INCLUDED IN BUNKER DELIVERY NOTE (BDN)
Published: 3 April 2024
Effective from 1 May 2024, the latest amendment to MARPOL Annex VI, Appendix V “Information to be included in the bunker delivery note”, brings changes to the documentation requirements on bunker delivery notes (BDN).
The amendments, adopted by the Marine Environment Protection Committee (MEPC), increase the information needed in BDN. Previously, the BDN required documentation of density and sulphur content. However, the latest addition mandates the inclusion of the flashpoint of fuel oil.
Now, the BDN must incorporate the tested flashpoint, ensuring compliance with the current standards, or provide a statement indicating that the flashpoint has been measured at or above 70°C. The testing standard is specified in the footnote as “ISO 2719:2016, Determination of flashpoint – Pensky-Martens closed cup method, Procedure A (for Distillate Fuels) or Procedure B (for Residual Fuels).”
In practical terms, suppliers must provide an exact measured flashpoint value on the BDN if measured at or below 69°C OR a statement would be adequate if the flashpoint has been measured at or above 70°C. However, suppliers may still decide to provide the actual flashpoint measurement on the BDN for values above 70°C.
Please note that the flashpoint limit remains unchanged; it remains at no less than 60°C for all oil fuels unless otherwise specified for emergency generators, where oil fuel with a flashpoint of no less than 43°C may be used (SOLAS Chapter II-2, Regulation 4.2.1).
After reviewing BDNs from various suppliers, it is evident that many have already incorporated flashpoint details, indicating proactive adoption of the forthcoming amendment. Additionally, most suppliers have chosen to report the actual flashpoint measurement derived from the ISO 2719 tests, which may be more useful for shipowners in certain fuel management scenarios. However, caution is advised, especially for bunker stems/deliveries in lesser-known ports or from lesser-known suppliers, as their system may not be fully compliant with the latest regulations in time.
In further alignment with these changes, the Maritime Safety Committee (MSC 106) has adopted amendments to SOLAS Chapter II-2. These amendments include requiring a pre-delivery declaration of conformity with regulation SOLAS II-2/4.2.1, and mandating the ship to receive a BDN specifying the flashpoint or a statement indicating the flashpoint has been measured at or above 70°C. Additionally, these amendments request contracting governments to undertake measures and actions in support of this initiative. They are expected to come into force on 1 January 2026, aligning better with the forthcoming changes to MARPOL Annex VI, Appendix V.
Shipowners are advised to prepare in advance for these amendments by reviewing their practices and ensuring their BDN adheres to the new requirements.
FURTHER INFORMATION
For further information, please do not hesitate to email lossprevention@tindallriley.com.
An overview of key regulations and standards affecting the shipping industry.
DISCLAIMER
This Loss Prevention Update is published by Britannia. Whilst the information is believed to be correct at the date of publication, the Association cannot, and does not, assume any responsibility for the completeness or accuracy of that information. The content of this publication does not constitute legal advice and Members should always contact the Association for specific advice on a particular matter.
LOSS PREVENTION FORM – HAVE YOUR SAYTo keep our loss prevention material as useful and relevant as possible we want to hear your suggestions on topics you’d like our team to address. The form takes less than 5 mins to complete. |